cable management
Cable Management
fiber connectivity
Fiber Connectivity
fiber cable
Fiber Cable
testing instruments
Testing Instruments
icon_passive networking
Passive Networking
FFTX
FTTX Solutions
splicer and accessories
Splicer & Accessories
view500
Cable Antenna Analyzer

Fiber Connectivity

MPO/MTP Patch cord

Lightem offers a full range of MPO/MTP multifiber products, ranging from patchcords, fanout hybrid cable, truck cable, pigtails and cassette.

MPO MTP patch cord

MPO/MTP HYBRID PATCH CORD

Lightem offers a full range of MPO/MTP multifiber products, ranging from patchcords, fanout hybrid cable, truck cable, pigtails and cassette. The MPO/MTP, with the push-on/pull-off insertion release mechanism, provides consistent and repeatable interconnections up to 48 fibers for today’s 40G and 100G network. MPO/MTP hybrid cable are custom-built with various type of connectors and special configuration. All connectors are factory polished and terminated with full testing before delivery.

  • Up to 24 fibers MTP/MPO per connector
  • Halogen free (LSZH) and low smoke to IEC 61034 and EN 50286
  • Flame retardant to IEC 60332-3C and EN 50266-2-4
  • Non corrosive to IEC 60754-2 (FRNC) and EN 50267
  • A pre-terminated, easy-to-install, high fiber density cabling solution
  • Pre-installed grip option supports up to 450N loads.
  • Singlemode, OM3, OM4 and OM5 fibers
  • MTP / MPO connector complying ANSI HIPPI-6400 and IEC 61754-7 and TIA/EIA-604

General Values
Model
Standard
Premium
Connector Type
Singlemode
Multimode
Singlemode
Multimode
UPC
APC
UPC
APC
Insertion loss (each channel)
≤0.75 dB
≤0.75 dB
≤0.5 dB
≤0.35dB
≤0.35dB
≤0.35dB
Return loss (each channel)
≤-40 dB
≤-55 dB
/
≤-40dB
≤-55dB
/
Test Wavelength
1310nm
850nm
Cable Count
Simplex or Duplex
Ferrule
Composite
Connector housing
Composite
Durability
≤0.2 dB at 200 cycles
Operating Temperature
-20° C ~ +70° C
Storage Temprature
-20° C ~ +70° C
MPO MTP cable assemblies

MPO/MTP CABLE ASSEMBLIES

The MPO/MTP, with the push-on/pull-off insertion release mechanism, provides consistent and repeatable interconnections up to 48 fibers for today’s 40G and 100G network. MPO/MTP hybrid cable  is custom-built with various types of connectors and special configuration. All connectors are factory polished and terminated with full testing before delivery.

  • Up to 24 fibers MTP/MPO per connector
  • Halogen free (LSZH) and low smoke to IEC 61034 and EN 50286
  • Flame retardant to IEC 60332-3C and EN 50266-2-4
  • Non corrosive to IEC 60754-2 (FRNC) and EN 50267
  • A pre-terminated, easy-to-install, high fiber density cabling solution
  • Pre-installed grip option supports up to 450N loads.
  • Singlemode, OM3, OM4 and OM5 fibers
  • MTP / MPO connector complying ANSI HIPPI-6400 and IEC 61754-7 and TIA/EIA-604

General Values
Model
Standard
Premium
Connector Type
Singlemode
Multimode
Singlemode
Multimode
UPC
APC
UPC
APC
Insertion loss (each channel)
≤0.75 dB
≤0.75 dB
≤0.5 dB
≤0.35dB
≤0.35dB
≤0.35dB
Return loss (each channel)
≤-40 dB
≤-55 dB
/
≤-40dB
≤-55dB
/
Test Wavelength
1310nm
850nm
Ferrule
Composite
Connector housing
Composite
Durability
≤0.2 dB at 200 cycles
Operating Temperature
-20° C ~ +70° C
Storage Temprature
-20° C ~ +70° C
error: